GL38 Bottle Cap 1/8 X 1/8 Web Assembly
Bottle cap for GL38 2L & 4L bottles, with O-ring and two 1/8" tubes and fittings.
New Site Launched: Looking for oligos? Visit our new oligo and Stellaris dedicated platform at
oligos.biosearchtech.com
FTN 1/8 MNPT X 1/4-28F FLT BTM ADAPTER, PEEK
Adapter, 1/8" Male NPT to 1/4-28 Female, PEEK, Red
35 mL Column Chuck
Column holder for 35 mL synthesis columns (100 - 300 µmol), MerMade 6 and 12 only. Use with column M35-1000, scale dependent on support loading.
GL38 Bottle Cap 1/8 X 1/4 Web Assembly
Bottle cap for GL38 2L & 4L bottles, with O-ring, one 1/8" tube and one 1/4" tube and fittings.
Vaccum Switch, 2.7"Hg Set Point, 1/8 MNPT, SS
Vacuum sensor.
FTN 1/4-28M FLT BTM NUT X 1/32-1/16 OD TUBE, PPS
1/4-28 Super Flangeless headless nut for 1/16" OD Tubing (replaces FNM-P-252)
Large Scale Vac Line Assembly (1/8")
Complete assembly for MerMade 6 and 12 column vacuum equipped with 1/8" line. Includes 2 ferrules/back rings (AX63584), 2 nuts (AX2000848) & 33" length of 1/8" PTFE tubing.
8 mL Column Chuck
Column holder for 8 mL syringe style synthesis columns (15 -30 µmol), MerMade 6 and 12 only. Use with column M8-1000, scale dependent on support loading.
Valve, Solenoid, Reagent, 2-Way, Standard
Lee reagent valve, 24v DC, 2-Way standard valve with pin leads. Comes with connector assembly to replace older valve with flying leads. Direct replacement for V-LFVX0510950B/B…
FTN 1/4-28M FLT BTM NUT X 1/8 OD TUBE, PPS
1/4-28 Super Flangeless Nut for 1/8" OD Tubing (replaces FNM-P-331)
Reg, Gas, Pressure, 1/8 NPT, 0-30 PSI Output
Argon regulator for reagents, 250 psi max in, 30 psi max out.
1.5 mL Column Chuck
Column holder for 1.5 mL syringe style synthesis columns (5-10 µmol), MerMade 6 and 12 only. Aluminium.
Filter, Reagent, 1/8" End of Line, 35µM, White
End of line filter for 1/8" tubing
FTN 1/4 OD X 3/16 ID Tube Insert, 316SS
Stainless steel insert for 3/16' ID tubing to be used with compression fittings.
Seal, Gasket, 83B, TPE, White
O-Ring for waste container carboy cap
WA-T-1520LF-24"
1/16" OD x 0.030" ID x 24", pre-cut Teflon tubing with Upchurch fittings.
Diaphragm replacement kit (for Dual Head Pump)
Diaphram replacement kit for AX2000992 dual head pump. Need 2 per pump.
Output, 1 Digital, 60V, 3A, 5V Logic, 2 Wire
Output relay used on non-USB instruments.
Tube, 1/16 ID, 1/8 OD, PTFE, Natural, 1450 PSI
1/8" OD x 1/16" ID, PTFE tubing, used in reagent bottle argon supply line. Priced per foot.
O-Ring, 210, 1" X 0.75" X 0.125", PTFE/VITON
O-Ring for 28-400 reagent bottle cap AX9920555 (previously AX2000689 or BC-607-054).
Added to basket